s5360 reset

• *#*#4636#*#* - Phone Information
• *2767*3855# - Hard Reset
• *#*#7780#*#* - Factory Reset
• *#*#7594#*#* - Change End Call/Power Option
• *#*#197328640#*#* - Service Mode
• *#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
• *#*#526#*#* - WLAN Test
• *#*#232338#*#* - Shows WiFi MAC address
• *#*#1472365#*#* - GPS Test
• *#*#1575#*#* - Another GPS test
• *#*#232331#*#* - Bluetooth test
• *#*#232337#*# - Shows Bluetooth device address
• *#*#8255#*#* - GTalk Service Monitor

TEST MODE CODE:

• *#*#0283#*#* - Packet Loopback
• *#*#0*#*#* - LCD test
• *#*#0673#*#* - Melody test
• *#*#0842#*#* - Device test (Vibration test and BackLight test)
• *#*#2663#*#* - Touch screen version
• *#*#2664#*#* - Touch screen test
• *#*#0588#*#* - Proximity sensor test
• *#*#3264#*#* - RAM version

Samsung GT S8530 Wave II
Samsung Galaxy Spica I570
Samsung Galaxy Mini S5570

 http://www.hargasamsunggalaxy.com/cara-mereset-samsung-galaxy-20120710442.html

Tutorial Hard Reset Samsung Galaxy Y

Jika anda merasa bisa melakukannya maka ikuti tutorial berikut ini agar proses reset samsung galaxy anda berhasil, berikut ini tutorialnya:

Harap perhatikan sebelum mereset gadget anda

1. Samsung galaxy anda harus dalam keadaan mati/off
2. Tekan dan tahan Tombol Home ( antara) + Volume Up +  tombol power
3. tunggu 5 detik sampai menu recovery sistem muncul
4. Kemudian akan muncul 4 pilihan

• reboot system now 
• apply update from sdcar
• wipe data/factory reset 
• wipe cache partition

5. Pilih ” Wipe data / factory reset ” menggunakan tombol Volume ( – )  dan tombol menu untuk konfirmasi, karena touchscreen tidak berfung pada mode recovery.
6. Setelah proses selesai maka handphone anda akan restart otomatis dan proses reset sudah selesai.

Partition SD Card Android Samsung Galaxy Y s5360

http://www.hargasamsunggalaxy.com/hape/partisi-micro-sd-android-menggunakan-gparted
 http://mobilecon.info/sdcard-partition-using-gparted-live.html
 http://www.hargasamsunggalaxy.com/upgrade-samsung-galaxy-gingerbread-20121027855.html


http://www.hargasamsunggalaxy.com/membuat-partisi-di-micro-sd-20120916554.html




Apa itu Partisi ?
Partisi adalah pengelolaan/pembagian penyimpanan data. Nah yang dibahas kali ini adalah cara partisi sd card. Secara default, sd card yang kita beli hanya memiliki 1 buah partisi yakni fat32. Dengan melakukan partisi pada sd card, kita bisa membaginya menjadi 3 buah partisi yakni fat32, ext2, dan Linux Swap
Apa kegunaan Partisi ?
Partisi pada sd card digunakan untuk meringankan memory internal. Beberapa smartphone Android seperti Galaxy Mini, Galaxy Young, Sony Ericsson Xperia X8, dan lain-lain memiliki memory internal yang kecil. Perlu kalian ketahui, setiap kita menginstal aplikasi walaupun diinstal di sd card, pasti memory internal akan bertambah sehingga kita tidak bisa menginstal banyak aplikasi. Maka dari itu, perlu dilakukan partisi pada sd card.
========================================================================
Secara umum, partisi pada sd card dibuat 3 buah partisi yakni fat32, ext2, dan linux swap.
Fat32 berguna untuk menyimpan data seperti lagu-lagu mp3, video, foto, dokumen, dan lain-lain. Ext2 berguna untuk tempat menginstal aplikasi, ext2 boleh dikatakan sebagai memory internal kedua, nah partisi ext2 ini digunakan ketika kita akan memindah aplikasi yang ada di memory internal ke sd card secara paksa. Pemindahan ini harus menggunakan aplikasi link2sd yang dapat diinstal apabila smartphone Androidmu telah di root.
Linux swap sendiri merupakan partisi yang digunakan untuk membantu kinerja RAM. Partisi ini dipakai apabila smartphone Androidmu memiliki RAM yang kecil.
========================================================================
Warning !!!
Sebelum melakukan partisi pada sd card, pastikan anda telah memindah data-data pada sd card ke komputer. Karena ketika melakukan partisi, data-data pada sd card
anda akan terhapus
========================================================================
Cara melakukan partisi
1) Download software Mini Tool Partition Wizard dan Serial keynya
2) Install software tersebut di Komputer/Laptop
3) Colok microSd ke komputer atau laptop menggunakan card reader. Warning !!! Jangan menggunakan kabel data
4) Buka software mini tool partition wizard
5) Pilih drive microSD anda lalu klik delete sehingga menjadi unallocated
6) Klik kanan, lalu klik create
PARTISI 1
Untuk menyimpan data utama seperti lagu, gambar, video, dll. Buat aja yang besar
Create As : Primary
File System : fat32
Saya sarankan :
microSD 2 GB : 1,4 GB
microSD 4 GB : 3.05 GB
7) Klik OK
8) Setelah itu, maka akan ada sisa dari microSD anda. Nah sisa ini digunakan untuk membuat partisi kedua. Klik kanan pilih create
PARTISI 2
Untuk menjadikan memory internal kedua
Create As : Primary
File System : ext2
Cluster size : 4 KB
Saya sarankan :
microSD 2 GB : Sisa tadi
microSD 4 GB : 600 MB
9) Klik OK
10) Lalu kita buat lagi partisi ketiga. Saya sarankan partisi ketiga ini dilakukan untuk microSD 4 GB dan diatasnya. Jadi microSD 2 GB sebaiknya tidak.
PARTISI 3
Untuk membantu kinerja RAM
Create AS : Primary
File System : linux swap
Saya sarankan :
microSD 4GB : Sisanya
==================================================================
Contoh Partisi MicroSD saya yang berukuran 4 GB ( ukuran sebenarnya 3,75 GB )
Primary Fat32 : 3.05 GB
Primary Ext2 : 600 MB
Primary Linux Swap : 100 MB
===================================================================
11) Klik OK
12) Setelah selesai semuanya, klik Apply yang ada pada pojok kiri atas
13) Tunggu hingga selesai
14) Selamat microSD anda sudah dipartisi
Setelah melakukan partisi ini, silahkan anda install aplikasi link2sd (pastikan smartphone androidmu telah di root). Setelah menginstal aplikasi ini, pindah aplikasi yang disimpan di memory internal ke microSD sehingga memory internal Android anda menjadi lebih lega
Di artikel Ilmu-Android ini, saya akan membahas tentang cara melakukan partisi sd card/microSD pada smartphone Android anda.
Apa itu Partisi ?
Partisi adalah pengelolaan/pembagian penyimpanan data. Nah yang dibahas kali ini adalah cara partisi sd card. Secara default, sd card yang kita beli hanya memiliki 1 buah partisi yakni fat32. Dengan melakukan partisi pada sd card, kita bisa membaginya menjadi 3 buah partisi yakni fat32, ext2, dan Linux Swap
Apa kegunaan Partisi ?
Partisi pada sd card digunakan untuk meringankan memory internal. Beberapa smartphone Android seperti Galaxy Mini, Galaxy Young, Sony Ericsson Xperia X8, dan lain-lain memiliki memory internal yang kecil. Perlu kalian ketahui, setiap kita menginstal aplikasi walaupun diinstal di sd card, pasti memory internal akan bertambah sehingga kita tidak bisa menginstal banyak aplikasi. Maka dari itu, perlu dilakukan partisi pada sd card.
========================================================================
Secara umum, partisi pada sd card dibuat 3 buah partisi yakni fat32, ext2, dan linux swap.
Fat32 berguna untuk menyimpan data seperti lagu-lagu mp3, video, foto, dokumen, dan lain-lain. Ext2 berguna untuk tempat menginstal aplikasi, ext2 boleh dikatakan sebagai memory internal kedua, nah partisi ext2 ini digunakan ketika kita akan memindah aplikasi yang ada di memory internal ke sd card secara paksa. Pemindahan ini harus menggunakan aplikasi link2sd yang dapat diinstal apabila smartphone Androidmu telah di root.
Linux swap sendiri merupakan partisi yang digunakan untuk membantu kinerja RAM. Partisi ini dipakai apabila smartphone Androidmu memiliki RAM yang kecil.
========================================================================
Warning !!!
Sebelum melakukan partisi pada sd card, pastikan anda telah memindah data-data pada sd card ke komputer. Karena ketika melakukan partisi, data-data pada sd card
anda akan terhapus
========================================================================
Cara melakukan partisi
1) Download software Mini Tool Partition Wizard dan Serial keynya
2) Install software tersebut di Komputer/Laptop
3) Colok microSd ke komputer atau laptop menggunakan card reader. Warning !!! Jangan menggunakan kabel data
4) Buka software mini tool partition wizard
5) Pilih drive microSD anda lalu klik delete sehingga menjadi unallocated
6) Klik kanan, lalu klik create
PARTISI 1
Untuk menyimpan data utama seperti lagu, gambar, video, dll. Buat aja yang besar
Create As : Primary
File System : fat32
Saya sarankan :
microSD 2 GB : 1,4 GB
microSD 4 GB : 3.05 GB
7) Klik OK
8) Setelah itu, maka akan ada sisa dari microSD anda. Nah sisa ini digunakan untuk membuat partisi kedua. Klik kanan pilih create
PARTISI 2 Untuk menjadikan memory internal kedua
Create As : Primary
File System : ext2
Cluster size : 4 KB
Saya sarankan :
microSD 2 GB : Sisa tadi microSD 4 GB : 600 MB
9) Klik OK
10) Lalu kita buat lagi partisi ketiga. Saya sarankan partisi ketiga ini dilakukan untuk microSD 4 GB dan diatasnya. Jadi microSD 2 GB sebaiknya tidak.
PARTISI 3 Untuk membantu kinerja RAM
Create AS : Primary File System : linux swap
Saya sarankan :
microSD 4GB : Sisanya
==================================================================
Contoh Partisi MicroSD saya yang berukuran 4 GB ( ukuran sebenarnya 3,75 GB )
Primary Fat32 : 3.05 GB
Primary Ext2 : 600 MB
Primary Linux Swap : 100 MB
===================================================================
11) Klik OK
12) Setelah selesai semuanya, klik Apply yang ada pada pojok kiri atas
13) Tunggu hingga selesai
14) Selamat microSD anda sudah dipartisi
Setelah melakukan partisi ini, silahkan anda install aplikasi link2sd (pastikan smartphone androidmu telah di root). Setelah menginstal aplikasi ini, pindah aplikasi yang disimpan di memory internal ke microSD sehingga memory internal Android anda menjadi lebih lega

setting gprs

Maxis

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Maxis GPRS / Maxis 3G
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Finish and OK to complete the setup.
• Homepage: http://wap.maxis.com.my/wml/index.wml
• Session Mode: Permanent
• IP adress: 202.075.133.049
• Login Type: Automatic,
• Authentication Type: Normal
MMS Settings

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Maxis MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 202.75.133.49
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://172.16.74.100:10021/mmsc and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Note : Blue color is for 3g setting
Provided by sakuraguy with allytom assist on 3g setting

For DiGi GPRS Activation

QUOTE

http://www.digi.com.my/data_services/gprs/...fig.do?page=web

Digi Manual Configuration

QUOTE

DiGi

OTA at http://www.digi.com.my/internet/3g/phone_setup.html

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: DiGi GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digiwap
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: digi
Password: digi
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

OTA at http://www.digi.com.my/data_services/gprs/...fig.do?page=web

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message… (or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: DiGi MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digimms
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: mms
Password: mms
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 203.92.128.160
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://mms.digi.com.my/servlets/mms and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Credit to sakuraguy

For Celcom GPRS And MMS Activation

QUOTE

http://www.channelx.com.my/mdp/gprs/wap_config.jsp

or

Dail 1111 from your mobile

Apart of getting settings from the network provider, or they failed, or you still have not receive anything after 30 hours and 20 times of doing the instructions above, you can always head to the phone manufacturer website and get the settings there.

It is as simple as, click the link below, then follow the instruction below. Usually, they will ask for your phone model, then your country, then the network provider, then key in your no. and the setting will be sent independently. Credit to youngkies and sakuraguy

Celcom Manual Configuration

QUOTE

Celcom

Celcom (MMS & GPRS): http://www.celcom.com.my/cep/productservic...RSMMS/main.html

Go to Write Message.
• Type gprspre (for prepaid) send to 95000 or b Type gprspost (for postpaid) send to 95000
• You will receive the settings & save / install all settings.
• You will be charge SMS send RM0.15 and SMS received RM0.40

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• Manual WAP GPRS Settings
• On Desk, tab Control Panel -> Internet setup.(or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Celcom GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Celcom MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: mms.celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 10.128.1.242
Port number: 8080
• Tab OK then Finish
• Under Homepage, key in http://mms.celcom.net.my and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Credit to sakuraguy

Download a Copy of ThePirateBay

This is a backup of all magnet links on The Pirate Bay. Something to keep handy.
https://thepiratebay.se/torrent/7016365
“Using this script, “allisfine” managed to copy the title, id, file size, seeds, leechers and magnet links of 1,643,194 torrents. Comments were not copied to keep the files as small as possible, and the end result is a full copy of all magnet links (magnet) on The Pirate Bay in a 90 megabytes file, 164 megabytes unzipped.”
“Here’s a copy of 17 million torrents from Bitsnoop.com, pretty much the same format but nicely categorized. It’s only 535 MB.”

Do Not Track Plus

Install this to prevent tracking through your browser.  Go to the website and watch the video or watch below for a full explanation.
http://www.abine.com/dntdetail.php


win7 - install USB

I’ll post the tl;dr version first.
Open a command prompt
DISKPART
LIST DISK
SELECT DISK #
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION #
ACTIVE
FORMAT QUICK FS=NTFS
ASSIGN
EXIT
E:
CD BOOT (Mounted/DVD with Windows Install)
BOOTSECT.EXE /NT60 H:  (Where “H” is your USB drive letter )
Copy Contents of Windows Install to USB Drive
Done.
(Long Version)
Procedure:
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT QUICK FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Windows 8 DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7 or Windows 8. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Reset Windows Password with Encrypted Drive

This is a quick how-to for resetting your Windows password, while still knowing your disk encryption password via TrueCrypt.
Most, if not all, password reset options for windows, will not work if your hard drive is encrypted with Bitlocker/TrueCrypt.
You will need a USB flash drive or CD-R, and Hiren’s BootCD. Get it here http://www.hirensbootcd.org/download/
Once your USB drive is bootable with Hiren’s, boot up from the flash drive and select Mini XP from the Hiren’s boot menu.

• In the bottom right in the taskbar, there is an icon called “Hiren’s BootCD Program Launcher”, Click it.
• Go to the Security / Encryption > TrueCrypt menu
• Click Select Device, and click your hard drive. It should be the C: drive.
• Select a drive letter, and click Mount.
• Click Mount Options
• Check the box that reads “Mount partition using system encryption without pre-boot authentication”
• Enter drive encryption password.
• Your hard drive will now be mounted as a new drive letter (temporarily)
• Go back to the Program Launcher, Passwords / Keys > Windows Login > NTPWEdit (Reset Xp/Vista/7 User Password)
• The NTPWedit will open with a default path to SAM file of C:\WINDOWS\SYSTEM32\CONFIG\SAM
• Change drive letter from C to whichever drive letter you selected to mount to, and click (Re)open.
• Your user names will be listed.
• Click your username, and Change Password.
• Set the new password, and Save Changes and Exit.

Reboot and login with the new password.

Crideted : qwerty

Repair Windows

http://toptricksandtips.blogspot.com/2011/07/trick-to-repair-windows-xp-without.html

How To Fix CD Error On XP

 

 If you are receiving a I/O device error with your CD-ROM drive, data cannot be read from the disc in the drive. This can be caused by a bad disc or when the transfer mode, used by the operating system, is not supported by the CD-ROM drive or has been changed. In order to resolve the problem you should first check the disc. You can then try changing the transfer mode of the IDE channel for the CD-ROM drive

Instructions Check the Disk

1. Restart the computer and wait for the operating system to load.
2. Open the CD-ROM drive and insert the disk. Wait and see if the disk will be read by the drive.
3. Take the disc out of the drive and see if it can be read in a different computer. Use the drive that is in a laptop, if you have one. This will verify whether or not there is a problem with the disc.
4. Insert a different disk into the drive on your computer and see if it can be accessed by the drive. If the disc is not being read correctly there may be a problem with the CD-ROM drive.

Change Transfer Mode of the IDE Channel

5.Left-click the Start button and then right-click the "My Computer" or "Computer" option. When the context menu appears select "Manage."
6. Select "Device Manager" under Computer Management (Local) from the left pane.
7. Click on the "+" sign next to IDE ATA/ATAPI controllers to view the available controllers. Right-click on the Secondary IDE Channel and select "Properties" from the context menu.
8.Click the Advanced Settings tab and then click the down arrow next to Transfer Mode under Device 0. Select "PIO Only" and then click the "OK" button.
9.Close the Computer Management Window and then insert the disc in the drive and see if it can be read.