Sunday, December 9, 2012

setting gprs

Maxis

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Maxis GPRS / Maxis 3G
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Finish and OK to complete the setup.
• Homepage: http://wap.maxis.com.my/wml/index.wml
• Session Mode: Permanent
• IP adress: 202.075.133.049
• Login Type: Automatic,
• Authentication Type: Normal
MMS Settings

OTA at http://www.maxis.com.my/3G/about3G.asp and choose option 3G Phone Configuration

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Maxis MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: net / unet
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: maxis
Password: wap
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 202.75.133.49
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://172.16.74.100:10021/mmsc and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Note : Blue color is for 3g setting
Provided by sakuraguy with allytom assist on 3g setting laugh.gif

For DiGi GPRS Activation
QUOTE


Digi Manual Configuration

QUOTE
DiGi

OTA at http://www.digi.com.my/internet/3g/phone_setup.html

Manual WAP Settings
• On Desk, tab Control Panel -> Internet setup. (or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: DiGi GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digiwap
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: digi
Password: digi
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

OTA at http://www.digi.com.my/data_services/gprs/...fig.do?page=web

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message… (or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: DiGi MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: digimms
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: mms
Password: mms
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 203.92.128.160
Port number: 80
• Tab OK then Finish
• Under Homepage, key in http://mms.digi.com.my/servlets/mms and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Credit to sakuraguy



For Celcom GPRS And MMS Activation
QUOTE


Apart of getting settings from the network provider, or they failed, or you still have not receive anything after 30 hours and 20 times of doing the instructions above, you can always head to the phone manufacturer website and get the settings there.

It is as simple as, click the link below, then follow the instruction below. Usually, they will ask for your phone model, then your country, then the network provider, then key in your no. and the setting will be sent independently.
Credit to youngkies and sakuraguy

Celcom Manual Configuration

QUOTE
Celcom

Celcom (MMS & GPRS): http://www.celcom.com.my/cep/productservic...RSMMS/main.html

Go to Write Message.
• Type gprspre (for prepaid) send to 95000 or b Type gprspost (for postpaid) send to 95000
• You will receive the settings & save / install all settings.
• You will be charge SMS send RM0.15 and SMS received RM0.40

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• Manual WAP GPRS Settings
• On Desk, tab Control Panel -> Internet setup.(or similar)
• Tab New access pt. and tab No, then tab Next and key in the following:
Connection name: Celcom GPRS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Finish and OK to complete the setup.



MMS Settings

Or refer to manual at http://www.channelx.com.my/mdp/gprs/wap_config.jsp and http://www.celcom.com.my/cep/productservic...RSMMS/main.html

• On Desk, tab Messaging and then press the Menu key -> Tools -> Message settings -> Multimedia message…(or similar)
• Tab Internet setup, then tab Next and key in the following:
Internet settings name: Celcom MMS
Data bearer: GPRS
• Tab Next
Network type: IPv4
Auto-retrieve access point: (Unchecked)
Access point: mms.celcom.net.my (Postpaid)
Access point: celcom (Prepaid)
• Tab Next and key in the following.
Prompt password at every login: (Unchecked)
Username: (Blank)
Password: (Blank)
• Tab Next then tab Advanced, under Proxies, key in the following:
Protocol: HTTP
Use proxy: (Checked)
Proxy server address: 10.128.1.242
Port number: 8080
• Tab OK then Finish
• Under Homepage, key in http://mms.celcom.net.my and tab OK to complete the setup.
• To send a MMS, under the Messaging menu, tab New multimedia msg.

Credit to sakuraguy

Saturday, November 17, 2012

Download a Copy of ThePirateBay

This is a backup of all magnet links on The Pirate Bay. Something to keep handy.
https://thepiratebay.se/torrent/7016365
“Using this script, “allisfine” managed to copy the title, id, file size, seeds, leechers and magnet links of 1,643,194 torrents. Comments were not copied to keep the files as small as possible, and the end result is a full copy of all magnet links (magnet) on The Pirate Bay in a 90 megabytes file, 164 megabytes unzipped.”
“Here’s a copy of 17 million torrents from Bitsnoop.com, pretty much the same format but nicely categorized. It’s only 535 MB.”


Do Not Track Plus


Install this to prevent tracking through your browser.  Go to the website and watch the video or watch below for a full explanation.
http://www.abine.com/dntdetail.php


win7 - install USB

I’ll post the tl;dr version first.
Open a command prompt
DISKPART
LIST DISK
SELECT DISK #
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION #
ACTIVE
FORMAT QUICK FS=NTFS
ASSIGN
EXIT
E:
CD BOOT (Mounted/DVD with Windows Install)
BOOTSECT.EXE /NT60 H:  (Where “H” is your USB drive letter )
Copy Contents of Windows Install to USB Drive
Done.
(Long Version)
Procedure:
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT QUICK FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Windows 8 DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7 or Windows 8. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Reset Windows Password with Encrypted Drive

This is a quick how-to for resetting your Windows password, while still knowing your disk encryption password via TrueCrypt.
Most, if not all, password reset options for windows, will not work if your hard drive is encrypted with Bitlocker/TrueCrypt.
You will need a USB flash drive or CD-R, and Hiren’s BootCD. Get it here http://www.hirensbootcd.org/download/
Once your USB drive is bootable with Hiren’s, boot up from the flash drive and select Mini XP from the Hiren’s boot menu.
  • In the bottom right in the taskbar, there is an icon called “Hiren’s BootCD Program Launcher”, Click it.
  • Go to the Security / Encryption > TrueCrypt menu
  • Click Select Device, and click your hard drive. It should be the C: drive.
  • Select a drive letter, and click Mount.
  • Click Mount Options
  • Check the box that reads “Mount partition using system encryption without pre-boot authentication”
  • Enter drive encryption password.
  • Your hard drive will now be mounted as a new drive letter (temporarily)
  • Go back to the Program Launcher, Passwords / Keys > Windows Login > NTPWEdit (Reset Xp/Vista/7 User Password)
  • The NTPWedit will open with a default path to SAM file of C:\WINDOWS\SYSTEM32\CONFIG\SAM
  • Change drive letter from C to whichever drive letter you selected to mount to, and click (Re)open.
  • Your user names will be listed.
  • Click your username, and Change Password.
  • Set the new password, and Save Changes and Exit.
Reboot and login with the new password.

Crideted : qwerty

Saturday, October 20, 2012

How To Fix CD Error On XP

 

 If you are receiving a I/O device error with your CD-ROM drive, data cannot be read from the disc in the drive. This can be caused by a bad disc or when the transfer mode, used by the operating system, is not supported by the CD-ROM drive or has been changed. In order to resolve the problem you should first check the disc. You can then try changing the transfer mode of the IDE channel for the CD-ROM drive

Instructions Check the Disk


1. Restart the computer and wait for the operating system to load.
2. Open the CD-ROM drive and insert the disk. Wait and see if the disk will be read by the drive.
3. Take the disc out of the drive and see if it can be read in a different computer. Use the drive that is in a laptop, if you have one. This will verify whether or not there is a problem with the disc.
4. Insert a different disk into the drive on your computer and see if it can be accessed by the drive. If the disc is not being read correctly there may be a problem with the CD-ROM drive.

Change Transfer Mode of the IDE Channel


5.Left-click the Start button and then right-click the "My Computer" or "Computer" option. When the context menu appears select "Manage."
6. Select "Device Manager" under Computer Management (Local) from the left pane.
7. Click on the "+" sign next to IDE ATA/ATAPI controllers to view the available controllers. Right-click on the Secondary IDE Channel and select "Properties" from the context menu.
8.Click the Advanced Settings tab and then click the down arrow next to Transfer Mode under Device 0. Select "PIO Only" and then click the "OK" button.
9.Close the Computer Management Window and then insert the disc in the drive and see if it can be read.

Thursday, October 11, 2012

TV Online

*Copyright NOTE* We do not own any TV channel Stream, If some one has objection on any stream then Contact Us and write in detail about Copyright Objection if exist.. We will take it seriously.




LIVE TV

RTM 1

RTM 2 

TV 9 

Astro Ceria

Saturday, July 7, 2012

astro arena

Astro Arena

 

 

 

http://tv.listenradios.com/rtm-tv2-live-streaming/
http://tv.listenradios.com/astro-ceria-streaming-live-2/

http://setceststream.blogspot.com/2012/07/arena.html - astro arena

http://vecasts.blogspot.com/2011/10/malaysia-tv-online-watch-malaysia-tv.html


http://tv3onlinemalaysia.blogspot.com/ 

Friday, July 6, 2012

Lajukan internet guna Opens


TmNet DNS servers  
202.188.1.5
202.188.0.133
202.188.1.4
202.188.0.132
Jaring DNS servers
192.228.128.20
192.228.128.18
192.228.128.16
161.142.227.17
61.6.38.139
161.142.2.17
161.142.212.17
TimeNet DNS servers
203.121.16.85
203.121.16.120
Open DNS  Servers (overseas) Public
208.67.222.222
208.67.220.220
Norton DNS Servers (Overseas) Public
198.153.192.1
198.153.194.1
Google DNS Servers (Overseas) Public
8.8.4.4
8.8.8.8

Saturday, June 2, 2012

wvdial configuration for celcom and maxis broadband

wvdial configuration for celcom and maxis broadband

 Broadband

I was cracking my head when just get my new maxis 3g broadband as in the configuration is much different then the celcom. I’m using huawei e220 and finally figure it out the below configuration.
WVDial Configuration for Celcom Broadband
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 3600000
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Area Code =
Phone = *99***1#
Username = celcom
Password = celcom
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 0
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
WVDial Configuration for Maxis Broadband
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
ISDN = 0
New PPPD = yes
Init1 = ATX
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”maxisbb”
Modem Type = Analog Modem
Phone = *99#
Username = maxis
Password = wap
Stupid Mode = 1
Compuserve = 0
Ask Password = 0
Dial Command = ATDT
Force Address =
Idle Seconds = 0
Auto DNS = 1

Thursday, May 3, 2012

Faster ShutDown

HKEY_CURRENT_USER-Control Panel-Desktop-HungAppTimeout

Thursday, April 5, 2012

Celcom GPRS & MMS Setting For China HandPhone

Celcom GPRS Setting

Step 1 : Select "Entertainment"
Step 2 : Select "Service"
Step 3 : Select "Data Account"
Step 4 : Select "GPRS" then select any of the "Account"
Step 5 : Select "Edit"
Step 6 : Enter following data :
1. Account Name : celcom3G
2. APN : celcom3g
3. User name :
4. Password :
5. Auth. Type : Normal
Step 7 : After the setting completed, select "Back" 2x


Step 1 : Select "Entertainment"
Step 2 : Select "Service"
Step 3 : Select "WAP" then select "Setting"
Step 4 : Select "Edit Profile"
Step 5 : Select any of the profile
Step 6 : Select "Edit Profile"
Step 7 : GPRS Setting :
1. Rename Profile : Celcom 3G
2. Homepage Setting : http://3g.celcom.net.my
3. Data Account : celcom3g
4. Select "Connection Type" then select "HTTP" then select "OK"
- Proxy Address : 010.128.001.242
- Proxy Port : 8080
5. User name :
6. Password :
Step 8 : Save the profile


Celcom MMS Setting

Step 1 : Select "PIM"
Step 2 : Select "Messages"
Step 3 : Select "MMS"
Step 4 : Select "Message Settings"
Step 5 : Select "Server Profile"
Step 6 : Select ,press "OK" then select "Edit Profile"
Step 7 : MMS Setting :
1. Rename Profile : Celcom 3G
2. Homepage : http://mms.celcom.net.my
3. Data Account : Celcom3G
4. Connection Type : select "HTTP" then select "OK"
- Proxy Address : 010.128.001.242
- Proxy Port : 8080
5. User name :
6. Password :
Step 8 : Save the profile